Dwin hd-50 Guía Del Usuario
Page 8 of 20
For D-sub 9 pin connector pin-out and RS232 command list, please refer to “PlasmaImage
™
HD-50
RS232 Control” section.
6. S-VIDEO INPUTS (S1, S2)
The S1 and S2 inputs are provided for NTSC (480i) or PAL (580i) video sources, such as off-air tuners,
satellite systems, cable boxes, SVHS VCR and DVD players. S-Video inputs, instead of composite
video inputs, are recommended for use with DVD players and satellite systems.
satellite systems, cable boxes, SVHS VCR and DVD players. S-Video inputs, instead of composite
video inputs, are recommended for use with DVD players and satellite systems.
7. COMPOSITE VIDEO INPUTS (V1, V2)
The V1 and V2 inputs are provided for NTSC (480i) or PAL (580i) video sources, such as off-air tuners,
satellite systems, cable boxes, VCR and DVD players.
8. COMPONENT VIDEO INPUTS (Y1, Y2, Y3)
Two component video Y, Cr, Cb or Y, Pr, Pb inputs are provided for interlaced and non-interlaced
component video signals from regular DVD players (480i, 580i), progressive component video signals
from progressive DVD players (480p, 580p), and progressive or interlaced HD signals (480p, 540p,
component video signals from regular DVD players (480i, 580i), progressive component video signals
from progressive DVD players (480p, 580p), and progressive or interlaced HD signals (480p, 540p,
720p, 1080i) from HD sources. The PlasmaImage
™
HD-50 Processor determines which type of
component video signal is applied to its input and processes it accordingly.
9. AC POWER RECEPTACLE
The AC power receptacle should
be connected to a non-switched 120 VAC outlet using the power cord
provided with the PlasmaImage
™
HD-50 system.
DWIN strongly recommends that the PlasmaImage
™
Display and Processor be connected to a high
quality surge protector.