Viewsonic pj106d Guía Del Usuario

ViewSonic 

PJ106D 

20

  Images may not be projected with good quality in an extremely hot or cold environment. 

(This is not a product malfunction.)

4.   Adjust the focus by turning the focus ring.
5.   Choose your desired external input source using the COMPUTER / VIDEO buttons.

  The projector automatically selects the appropriate signal format. The selected 

signal format is displayed on the screen.

6.   Adjust the image size by changing the distance between the projector and the screen.

  If necessary, adjust the focus ring again.

  The air outlet fan rotates faster as the temperature around the projector rises.

Power-off

Use the following procedure to turn off the projector. Do not turn off the projector by 
unplugging the power cord while the lamp is on. Unplugging while the lamp is on degrades 
the lamp’s performance and causes failure in the projector.
1.   Press the POWER button either on the control panel or on the remote control.

  The message “POWER OFF? PRESS POWER AGAIN” appears on the screen.
  To cancel, press any button except the POWER button. 

2.   Press the POWER button either on the control panel or on the remote control within 10 

seconds again.

  Both the lamp and the LAMP indicator will go out. 
  The POWER indicator lights up. 

3.   Unplug the power cord.

  The CHARGE indicator will go out if a not fully chargedbattery is connected with 

the projector.

  The POWER indicator goes out.

  In case the system has frozen or hung up for whatever reason and the system has 

stopped responding, you may shut off the system by holding down the POWER 
button either on the control panel or on the remote control for 5 seconds.