Viewsonic pj106d Guía Del Usuario
ViewSonic
PJ106D
28
Troubleshooting
The following offers solutions to some of the common problems you may encounter. We
suggest that you consult this chart before contacting your dealer.
suggest that you consult this chart before contacting your dealer.
Images aren’t projected on the screen.
Problem
Cause and solution
Power isn’t turned on.
Check the states of the indicators.
LAMP(Red)
POWER(Red)
Charge(Red) Solution
Off
Off
Off
Connect the power cord
to the projector.
Plug the power cord into
a wall outlet.
Images aren’
t projected on the
screen.
t projected on the
screen.
Cancel blanking by pressing the Blank button.
On rare occasion, the lamp fails to light up. In such cases, try to light the lamp
On rare occasion, the lamp fails to light up. In such cases, try to light the lamp
again.
Check that the cable connected to the external device isn’t broken.
When an extension cord is being used, replace it with the supplied cable and
When an extension cord is being used, replace it with the supplied cable and
check whether images are projected correctly.
Images suddenly
disappear.
disappear.
The air inlet or outlet grille may be blocked.
Remove the objects blocking the air inlet or outlet grille and carry out the
following.
1. Wait for the air inlet or outlet fan to stop (or wait for the LAMP indicator
to go out.)
2. Unplug the power cord from the wall outlet.
3. Wait about 1 minute.
4. Plug the power cord into the wall outlet.
5. Press the POWER button.
3. Wait about 1 minute.
4. Plug the power cord into the wall outlet.
5. Press the POWER button.
Check that the battery or power cord connected with the projector correctly.