Viewsonic PJ406D Guía Del Usuario

ViewSonic PJ406D

Problem: No image appears on screen.



Ensure all the cables and power connections are correctly and

securely connected as described in the “Installation” section.



Ensure the pins of connectors are not crooked or broken.



Check if the projection lamp has been securely installed. Please

refer to the “Replacing the lamp” section.



Make sure you have removed the lens cap and the projector is

switched on.



Ensure that the “Hide” feature is not turned on.

Problem: Partial, scrolling or incorrectly displayed image.



Press “Re- sync” on the Remote Control or on the Control Panel.



If you are using a PC:

  For Windows 3.x:
  1.  In the Windows Program Manager, double click the “Windows
    Setup” icon in the Main group.
  2.  Verify that your display resolution setting is less than  or equal

    to 1280 x 1024.
  For Windows 95, 98, 2000, XP:
  1.  From the “My Computer” icon, open the “Control Panel”

    folder, and double click the “Display” icon.
  2.  Select the “Settings” tab
  3.  Click on the “Advanced Properties” button.

If the projector is still not projecting the whole image, you will

also need to change the monitor display you are using. Refer to

the following steps.

Troubleshooting

If you experience trouble with the projector, refer to the fol-

lowing information. If the problem persists, please contact

your local reseller or service center.