Viewsonic PJ500 Guía Del Usuario
ViewSonic PJ500
6
Installation
Refer to the graphics and tables on this page to determine the screen size and projection distance.
The projection distances shown in the table below are for full size (800 x 600 pixels).
a Distance from the projector to the screen (+10%).
b Distance from the lens center to the bottom of the screen (+10%).
b Distance from the lens center to the bottom of the screen (+10%).
Figure 5: Screen Views
Angle Adjustment
Use the foot adjusters on the bottom of the projector to adjust the projection angle. The angle is
variable within approximately 0° to 10°.
variable within approximately 0° to 10°.
1
Lift up the front side of the projector, and pressing the foot adjuster button, adjust the projection
angle.
angle.
2
Release the button to lock at the desired angle.
3
Rotate the foot pad as shown in the graphic to adjust the left/right slope.
Table 1: Projection Distance
Screen Size
Inches (m)
Inches (m)
a
Inches (m)
Minimum and Maximum
b
Inches
(cm)
40 (1.0)
37 (0.9)
46 (1.2)
3 (8.7)
60 (1.5)
57 (1.5)
69 (1.8)
5 (13.1)
80 (2.0)
77 (1.9)
93 (2.4)
7 (17.4)
100 (2.5)
96 (2.4)
116 (2.9)
9 (21.8)
120 (3.0)
116 (2.9)
139 (3.5)
10 (26.1)
150 (3.8)
145 (3.7)
174 (4.4)
13 (32.7)
200 (5.0)
194 (4.9)
233 (5.9)
17 (43.5)
Warnings
• Position the projector in a horizontal position; other positions can cause heat build-up and damage to the projector.
• Make sure the heat ventilation holes are not blocked.
• Do not use the projector in a smoky environment. Smoke residue may cause buildup on critical parts (i.e. LCD panel,
• Make sure the heat ventilation holes are not blocked.
• Do not use the projector in a smoky environment. Smoke residue may cause buildup on critical parts (i.e. LCD panel,
lens assembly, etc.)
Figure 6: Angle Adjustment