Viewsonic PJ501 Manual De Usuario
ViewSonic PJ500/PJ550/PJ501/PJ551
10
Basic Operation
Table 3 below refers to buttons on the projector control panel and on the remote control. Items
marked with (*) may be accessed from the projector control panel.
Table 3: Basic Operation
Item
Description
INPUT SELECT
(projector control panel)
Select Input Signal (*) : press the INPUT Button.
RGB J VIDEO J S-VIDEO J COMPONENT (JRGB)
Select RGB Input: Press the RGB button.
VIDEO/S-VIDEO/COMPONENT J RGB
Select Video Input: Press the VIDEO button.
RGB J VIDEO/S-VIDEO/COMPONENT
VIDEO J S-VIDEO J COMPONENT (JVIDEO)
• The selected signal name is displayed for approximately 3 seconds when the input signal is
RGB J VIDEO J S-VIDEO J COMPONENT (JRGB)
Select RGB Input: Press the RGB button.
VIDEO/S-VIDEO/COMPONENT J RGB
Select Video Input: Press the VIDEO button.
RGB J VIDEO/S-VIDEO/COMPONENT
VIDEO J S-VIDEO J COMPONENT (JVIDEO)
• The selected signal name is displayed for approximately 3 seconds when the input signal is
changed.
POSITION
(remote control)
Set/Clear Position Adjustment mode : Press the POSITION button.
“POSITION” is displayed in the POSITION mode.
“POSITION” is displayed in the POSITION mode.
Image Position Adjustment: Press the
buttons in the POSITION mode.
• Valid only in the MAGNIFY mode when a video signal is input.
• After approximately 10 seconds of inactivity “POSITION” disappears and the POSITION
• After approximately 10 seconds of inactivity “POSITION” disappears and the POSITION
mode is cleared automatically.
RESET (*)
(remote control)
Initialize Each item: Select an item and press the RESET button.
Initialize Position Adjustment: Press the RESET button in the POSITION mode.
This function is valid only when RGB signal is input.
• Valid except for: VOLUME, LANGUAGE, H PHASE, and WHISPER.
Initialize Position Adjustment: Press the RESET button in the POSITION mode.
This function is valid only when RGB signal is input.
• Valid except for: VOLUME, LANGUAGE, H PHASE, and WHISPER.
MAGNIFY
(remote control)
Set MAGNIFY Mode: Press the MAGNIFY “ON” button.
Move Magnified Area: Run the POSITION in the MAGNIFY mode.
Move Magnified Area: Run the POSITION in the MAGNIFY mode.
Adjust Magnification: Press the MAGNIFY
/
button in MAGNIFY mode.
MAGNIFY
magnifies the image. MAGNIFY (-) reduces the image.
Clear MAGNIFY Mode: Press the MAGNIFY
button.
• The MAGNIFY mode is cleared by selecting AUTO, ASPECT, INPUT SELECT, or VIDEO,
or changing the input signal.
FREEZE
(remote control)
Set/Clear FREEZE Mode: Press the FREEZE button. When the [ II ] icon is displayed, the
image is frozen in the FREEZE mode.
• The FREEZE mode is cleared by selecting POSITION, VOLUME, MUTE, Automatic
image is frozen in the FREEZE mode.
• The FREEZE mode is cleared by selecting POSITION, VOLUME, MUTE, Automatic
Adjustment, BLANK ON/OFF, or MENU ON/OFF, or by changing the input signal.
• Do not forget to clear frozen static images.
KEYSTONE (*)
(projector control panel
and remote control)
Set/Clear KEYSTONE Mode: Press the KEYSTONE
button.
Adjust Keystone: Press the
/
buttons in the KEYSTONE mode.
reduces the width of the bottom of the projected image.
reduces the width of the top
of the projected image.
VOLUME
(remote control)
Set/Clear VOLUME Mode: Press the VOLUME button to display the Volume menu, then
press
press
/
buttons on the remote control to increase/decrease the loudness of the
sound.
After the desired volume is selected, press the VOLUME button again to exit the Volume
After the desired volume is selected, press the VOLUME button again to exit the Volume
mode.
MUTE
(remote control)
Set/Clear Mute Mode: Press the MUTE
button. The sound is silenced in this mode.