Viewsonic PJ513D Manual De Usuario
ViewSonic 32 PJ513D/PJ513DB
DISPLAY menu
PICTURE menu
Some picture adjustments are available only when certain input sources are in use.
Unavailable adjustments are not shown on the screen.
Unavailable adjustments are not shown on the screen.
FUNCTION
(default setting/
value)
value)
DESCRIPTION
(default setting/value)
Aspect Ratio
(Auto)
There are four options to set the image's aspect ratio depending on
your input signal source.
your input signal source.
See
for details.
Keystone
(0)
Corrects any keystoning of the image. See
Position
(0)
Displays the position adjustment page. To move the projected
image, use the directional arrow buttons. The values shown on the
lower position of the page change with every button press you made
until they reach their maximum or minimum.
image, use the directional arrow buttons. The values shown on the
lower position of the page change with every button press you made
until they reach their maximum or minimum.
Phase
(depends on the
selected input
source)
selected input
source)
Adjusts the clock phase to reduce image
distortion.
distortion.
H. Size
(depends on the
selected input
source)
selected input
source)
Adjusts the horizontal width of the image.
Digital Zoom
(100%)
Magnifies or reduces the projected image. See
for details.
FUNCTION
(default setting /
value)
value)
DESCRIPTION
Preset Mode
(PC: Brightest;
YPbPr/ S-Video/
Video:
Standard)
YPbPr/ S-Video/
Video:
Standard)
Pre-defined preset modes are provided so you can optimize your
projector image set-up to suit your program type. See
projector image set-up to suit your program type. See
for details.
Reference
Mode
Mode
Selects an preset mode that most suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See
and further fine-tune the image based on the selections listed on the
same page below. See
for details.
Brightness
Adjusts the brightness of the image.
See
for details.