Viewsonic PJL6243 Guía Del Usuario

6

ViewSonic PJL6243

6

Openings in the cabinet are provided for ventilation. To 

ensure reliable operation of the product and to protect it 

from overheating, these openings must not be blocked 

or covered. 

 

Hot air is exhausted from the exhaust vent. When using 

or installing the projector, the following precautions 

should be taken. 

–   Do not put any flammable object or spray can near 

the projector, hot air is exhausted from the ventilation 

holes.

–   Keep the exhaust vent at least 3’ (1 m) away from 

any objects.

–  Do not touch a peripheral part of the exhaust vent, 

especially screws and metallic parts. These areas will 

become hot while the projector is being used.

–  Do not put anything on the cabinet. Objects put on the 

cabinet will not only get damaged but also may cause 

fire hazard by heat.

–  Make sure that there is no object under the projector 

to prevent from covering the bottom openings.

Cooling fans are provided to cool down the projector. 

The fans’ running speed is changed according to the 

temperature inside the projector.

When moving the projector, retract the adjustable foot 

to prevent damage to the cabinet and use a suitable 

carrying case.

When this projector is not in use for an extended

period, put it into a suitable case to protect the

projector.

Exhaust Vent

(Hot air exhaust)

Do not pitch the projector more than 

30 degrees from above and below.

Do not point the projector up to 

project an image.

Do not point the projector down to 

project an image. 

Do not put the projector on either side 

to project an image. 

Install the projector properly. Improper installation may 

reduce the lamp life and cause a fire hazard.

Do not roll the projector more than 20 

degrees from side to side.

20°

20°

30°

30°

–  Do not drop or bump the projector, otherwise damages 

or malfunctions may result.

–   When carrying the projector, use a suitable carrying 

case.

–  Do not transport the projector by courier or any other 

transport service in an unsuitable transport case. This 

may cause damage to the projector. For information 

about transporting the projector by courier or any other 

transport service, consult your dealer.

–  Do not put the projector in a case before the projector is 

cooled enough.

Air Intake Vent

Air Intake Vent

(Filter)