Viewsonic PJL6243 Guía Del Usuario

17

ViewSonic PJL6243

17

This projector uses nominal input voltages of 

100-240 V AC and it automatically selects the 

correct input voltage. It is designed to work with 

single-phase power systems having a grounded 

neutral conductor. To reduce the risk of electrical 

shock, do not plug into any other type of power 

system.

If you are not sure of the type of power being 

supplied, consult your authorized dealer or 

service center.

Connect the projector with all peripheral 

equipment before turning the projector on.



Note:

   Unplug the AC power cord when the projector is not in use.  When this projector is connected 

  to an outlet with the AC power cord, it is in Stand-by mode and consumes a little electric power.

Connect the AC power cord 

(supplied) to the projector.

To the AC outlet.

To power cord 

connector on your 

projector.

To the AC outlet.

To the AC outlet.

Ground

AC power cord must meet requirement of the country where you use the projector.

Confirm the AC plug type with the chart below and proper AC power cord must be used.

If supplied AC power cord does not match your AC outlet, contact your sales dealer.





Ground

The AC outlet must be near this equipment 

and must be easily accessible.

  

Before using the AC Power Cord, attach the ferrite core (supplied) as shown below. (See below for 

mounting location.)
The Power Cord with ferrite core must be used for RF interference suppression.

0.39" (10 mm)

AC Power Cord

Ferrite Core

Keep closing until it makes  

 a clicking sound.