Viewsonic PJL6243 Guía Del Usuario

35

ViewSonic PJL6243

35

Select 

Digital zoom +. The On-Screen Menu 

disappears and 

D. zoom + appears. Press the 

SELECT button to expand the image size. Use the 

Point ▲▼◄► buttons to pan the image. The Panning 

function can work only when the image is larger 

than the screen size. A projected image can be also 

expanded by pressing the D.ZOOM ▲ or the SELECT 

button on the remote control. 

To exit the Digital zoom +/– mode, press any button 

except the D.ZOOM ▲▼ buttons, SELECT and Point 

buttons.

Select 

Digital zoom –. The On-Screen Menu 

disappears and 

D. zoom – appears. Press the SELECT 

button to compress image size. 

The projected image can be also compressed by 

pressing the D.ZOOM ▼ or the SELECT button on the 

remote control.  

To return to the previous screen size, select a screen 

size from the Screen Size Adjustment Menu or select 

an input source from the Input Source Selection Menu 

(see page 27) again, or adjust the screen size with the 

D.ZOOM ▲▼ buttons.



 

• The  minimum  compression  ratio  is  limited 

depending on the input signal, when the 

Keystone function is working or when the 

custom is selected for the screen size.

  • 

True and Digital  zoom  +/– are disabled 

and cannot be displayed when 

480i, 

576i,  480p,  576p,  720p,1035i or 1080i is 

selected in the PC System Menu (p.28).

  • 

Digital zoom +/- cannot be selected when 

True is selected.

  • The  minimum  compression  ratio  is  limited 

at Normal screen size.

When this function is set to 

On, the picture will be top/

bottom and left/right reversed. This function is used to

project the image from a ceiling-mounted projector.

When this function is set to 

On, the picture will be 

left/right reversed. This function is used to project the 

image from rear of the screen.

To reset the adjusted data, select Reset and press the

SELECT button. A confirmation box appears and then 

select Yes. All adjustments will return to their previous 

figures.

This function is used to adjust keystone distortion of the  

projected image. Use the Point ▲▼ buttons to choose 

the item you want to adjust.

 

    To correct keystone distortion, press the SELECT 

button.  

Keystone appears on the screen. Use the Point ▲▼ 

buttons to correct keystone distortion (p.23).

    To store or reset the keystone correction, press the 

Point ► button.

    Store .............  Keep the keystone correction 

even when the AC power cord is 

unplugged.

    

Reset .............  Release the keystone correction when 

the AC  power cord is unplugged.