Viewsonic PJL6243 Guía Del Usuario

49

ViewSonic PJL6243

49

The COMPUTER IN 2/MONITOR OUT terminal on the 

back of the projector is switchable for computer input 

or monitor output. (See page 9)  Select 

Computer 2 or 

Monitor Out with the Point ▲▼ buttons.

 

Computer 2 . .   computer input

 

Monitor Out . .   monitor out

Terminal function is not available when selecting 

Computer 2 to the input source.  Change the input 

source to the others (

Computer 1, and so on) so that 

the Terminal function will be available. (pp.25, 36, 37)

Time left before Lamp is off.

For reducing power consumption as well as maintaining 

the lamp life, the Power management function turns off 

the projection lamp when the projector is not operated 

for a certain period.

Select one of the following options:

Ready ...............   When the lamp has been fully 

cooled down, the POWER 

indicator changes to green 

blinking. In this condition, the 

projection lamp will be turned on 

if the input signal is reconnected 

or any button on the top control or 

remote control is pressed. 

Shut down .......   When the lamp has been fully 

cooled down, the power will be 

turned off. 

Off ....................   Power management function is 

off. 

Timer ................   If the input signal is interrupted 

and no button is pressed for more 

than 30 seconds, the timer display 

with 

No signal appears. It starts 

the countdown until the lamp is 

turned off. Use the Point ▲▼ 

buttons to set the Timer (1~30 

min).



   Factory default is 

Ready: 5 min.

When this function is set to 

On, the projector will be 

automatically turned on just by connecting the AC 

power cord to a wall outlet. 



Be sure to turn off the projector properly (see 

“Turning Off the Projector” on page 20). If 

the projector is turned off in the incorrect 

sequence, the Direct on function will not work 

properly.