GE JVM1630 Instruccion De Instalación

Push the bottom of the filter in until it snaps into
place behind the locking tabs. When properly
installed, the wire mesh of the filter should be
visible from the front.
Replace the grille and the 2 screws.

Close the door.

Remove 2 screws on top of grille using a 
Phillips screwdriver. 
Open the door 90°.
Remove the grille. 

Insert the top of the filter up and into the grooves
on the inside of the top opening.

4 Tighten the three screws to the top of the oven

completely. (While tightening screws, hold 
the oven in place against the wall and the top
cabinet.)

Attach the oven to the top cabinet by inserting 
3 self-aligning screws through outer top cabinet
holes. Turn two full turns on each screw. Be sure
to keep power cord tight. Be careful not to pinch
the cord, especially when mounting flush to
bottom of cabinet.

Install grease filters. See the Owner’s Manual
packed with the oven.

Insert mesh-side up

Charcoal
Filter