VIVOTEK FD8133 Guía Del Usuario

 

 

 

 

This Network Camera provides a general I/O terminal block which is used to connect external 

input / output devices. The pin definitions are described below.

This network camera is compliant with 

MicroSD/SDHC 32GB and other preceding standard SD 

cards�

The reset button is used to reset the system or restore the factory default settings� Sometimes 

resetting the system can return the camera to normal operation� If the system problems remain 

after reset, restore the factory settings and install again�

Reset: Press and release the recessed reset button with a paper clip or thin object� Wait for the 

Network Camera to reboot�

Restore: Press and hold the recessed reset button until the status LED rapidly blinks� Note that 

all settings will be restored to factory default� Upon successful restore, the status LED will blink 

green and red during normal operation�

Pin

Name

+ 

Digital Iutput +

-

Digital Iutput -

Lens

IR LEDs (8 units, distance 10m) 

(FD8134 only)

Reset Button

General I/O Terminal Block

Status LED

Light Sensor

MicroSD/SDHC 

Card Slot

Black Cover

Ethernet 10/100 

RJ45 Plug

Power Cord Socket