VIZIO VHT510 Guía Del Usuario

Descargar
Página de 23
VIZIO VHT510 User Manual 
www.VIZIO.com 
Satellite Speaker Connections 
1.  Threaded insert—Use this to mount the satellite speaker to 
a wall. 
2.  Keyhole—Use these to hang the satellite speaker on a wall. 
3.  CONNECTOR—Connect speaker wire from the subwoofer 
here (pre-installed at factory). See Connecting speakers to 
the subwoofer
 on page 11 for steps to connect your satellite 
speakers to your subwoofer. 
 
Top Panel Buttons 
Power (
)  
  Press to turn your Sound Bar on and off.  
  Press and hold for 3 seconds to put your 
Sound Bar into standby mode. The indicators 
turn off. 
Input 
  Press repeatedly to step through the input 
sources in the following sequence: IN 
(Analog In), Optical In, or iPod, if a VIZIO 
wireless iPod dock is paired with your Sound 
Bar. Go to 
www.vizio.com
 for more information. 
  Press and hold for 3 seconds to put your Sound Bar into pairing mode. See Pairing on page 17 
for more information on pairing. 
Vol + / -  —Press to turn the speaker volume up or down.  
Remote Control Sensor—The sensor is located to the right of the LED window. Point the remote control 
directly at this window for the best response to the remote signal. 
Button Combinations: Some buttons, when pressed in combination with other buttons will perform other 
procedures.  
  Volume Up + Volume Down: Press and hold for one second to mute your Sound Bar. 
  Power + Volume Up + Volume Down: Press and hold for 10 seconds to return your Sound Bar 
to factory default mode. 
  Input + Volume Up: Press and hold for five seconds to put your Sound Bar into Rear Mode. Use 
this mode when the rear left and right satellite speakers are placed behind the listening position. 
This mode provides the best 5.1 home theater experience and is the default mode of your Sound 
Bar. 
  Input + Volume Down: Press and hold for five seconds to put your Sound Bar into Front Mode. 
Use this mode if you want to put the rear left and right satellite speakers in the front of the room. 
This mode uses SRS CircleSurround HD technology to provide a virtual 5.1 surround sound 
experience. 
 
Important:
 DO NOT ATTEMPT to remove the speaker grill as it will void your warranty.