VIZIO d1 Guía Del Usuario
BRAVO D1 User Guide
Page 8
.
VINC.COM
S-Video
1. Using the S-Video cable connect one 4-Pin Din plug to the S-Video out connector on the
Bravo D1 and the other 4-Pin DIN to the S-Video in on the TV.
2. Using the Audio cable with one red and one white RCA plug on each end, at one end of
the cable connect the red RCA plug to the Right Audio Out (red) connector and connect
the white RCA plug to the Left Audio Out (white) connector of the Bravo D1. Connect the
opposite end of the cable to the Right and Left (red and white) Audio In connectors on
opposite end of the cable to the Right and Left (red and white) Audio In connectors on
the TV.
TV
Video Audio S-Video
R L
Component (YPbPr)
Component video (YPbPr) is used for Progressive Scan output and this gives a flicker-free
image that gives the most significant improvement with the film-based and video-based
content that is on a DVD. To enjoy the full potential possible with this Progressive Scan
DVD player, a Progressive Scan TV is required.
This DVD player has Progressive Scan conversion with 3:2 pull down for film-based
content making it possible to double the vertical resolution of the picture to 480 lines
(480p) every time the picture is refreshed (1/60th of a second). This 3:2 pull down
removes the “jerkiness” that is seen with simple scan doubling and so greatly improves
the smooth transition of moving images, especially during slow motion mode.
the smooth transition of moving images, especially during slow motion mode.