VIZIO d1 Guía Del Usuario

BRAVO D1 User Guide

 

Page 4 

  

.

 

VINC.COM

 

 

1.  Read through this User Guide. 
2.  Unpack the unit. 
3.  Load batteries into the Remote Control. 
4.  Connect the Bravo D1 to your Audio/Video system. 
5.  Plug the Bravo D1 (and other connected A/V devices) into an electrical outlet and turn on 

all of the devices. 

6.  Verify that the settings of the Bravo D1, TV and Amplifier match. 

The standard Bravo D1 package contains the following: 

ƒ

  Bravo D1 DVD player 

ƒ

  Remote Control (with batteries) 

ƒ

  AC power cord 

ƒ

  AV cables 

ƒ

  This User Guide 

The batteries are packaged separately from the Remote Control.  To load them into the remote: 

•  Remove the battery compartment cover. 
•  Load the two AAA batteries into the battery compartment.  Position the + and – 

symbols on the batteries in the same orientation as the image of the batteries on 

the compartment. 

•  When replacing batteries, always replace both batteries.  Mixing new and used 

batteries reduces battery life. 

•  Remove the batteries if the Remote Control will not be used for a long time. 

The Bravo D1 includes a series of different video output options including DVI, Component, S-

Video, and Composite outputs.  To assist in the setup process, the default setting for video 

output is the Composite Video setting.  To adjust this setting, please be prepared to do the 
following: 

ƒ

  Connect the Bravo D1 to the display using the Composite Video Output 

connector AND the secondary video output source. 

ƒ

  Refer to the instructions on pages 11 & 16 for changing the video output 

modes. 

ƒ

  Once a new video output mode has been configured, the composite video 

connections can be removed if desired.