VIZIO E422VA Guía Del Usuario

VIZIO E422VA User Manual 

42 

www.VIZIO.com 

When you first turned on your HDTV you set up your network connection 
using the Setup App. If you did not do this or if your setup has changed, 
you can do this from the Network

menu. 

The Ethernet function on your HDTV is used to access the Internet. Your 
HDTV also has 802.11n wireless, so you can connect your TV to the 
Internet through your wireless home network. A wired connection may 
deliver a more consistent connection depending on the conditions in your 
home environment. When you enter the Network Menu you will see your 
current connection method. 
 

View that your wired connection is set to Connected. This is not an option 
that you can adjust. It is for information only.  
 

Select to view and/or manually change your network settings. 

Select to manually change your network settings such as the IP Address, the Subnet Mask, the 
Default Gateway, the Preferred DNS Server, and the Alternate DNS Server.  

Warning:

 unless you are an advanced user and are comfortable with wired and wireless networks, do not 

adjust these settings. 
 

Select this option to test your network connection. 

 

If there is no wired connection, the 
wireless menu will be displayed and 
you will see a list of available wireless 
networks. You will also see that your 
Wired Connection is set to 
Disconnected

. 

1. Press 

 to select your wireless 

network, and then press OK. If you 
do not see your wireless network 
in the list, select More Access 
Points and then press OK. 

2.  If the network is password 

protected, enter the secure access 
code you created when setting up 
your wireless router. Slide the 
remote control open and begin 
typing in the code. You can also select Show Keyboard and use the on-screen keyboard 
instead of the remote control. When you are finished entering the code, select Connect.