VIZIO VW26L Guía Del Usuario

VIZIO VW26L HDTV10F User Manual 

1. 

Connecting the Power Cable 
Connect the power cord to the power cord connector on the back of the HDTV, and then plug the 
power cord into an AC wall socket. 

2. 

Connect Audio and Video Cables to the HDTV 
(see pages 13 ~ 23 for detailed steps) 

3. 

Turning Power On 
Once all the components are connected, press the Power ON button on the side of the HDTV, or 
press the Power ON (Red) button on the remote control. 

4. 

Select Input Source 
Select the Input Source for the HDTV by pressing the INPUT 
button on the side of the TV or using the Input button on the 
remote control.  Pressing this button will cycle you through the 
following options: TV, AV1, AV2, Component, RGB, HDMI1 and 
HDMI2. 

5. 

Using DTV and TV with an Antenna or Cable 
At first power on, the HDTV will have the DTV/TV input selected 
and will guide through some setup screens.  If it is not the first 
time the HDTV has been powered on, you will need to select TV 
using the INPUT button on the remote control or the side of the 
HDTV, or directly by pressing the TV button on the remote control, 
and Auto Scan for the available TV channels. 
 
 
 
 
 
 
 

Note: If you do not see this option within the OSD, you might have selected the wrong input in the 
previous steps and you will need to repeat step 4 (above) to select the correct input source. 

a.  The screen will show the first 

Initial Setup OSD panel. 
 
Press the OK button on the 
remote control. 
 

 

 

 

b.  The Language choice screen will 

be displayed; the default English 
option is highlighted.  If you wish 
to change the OSD language to 
Français or Español, press the         
button on the remote control to 
select the language you want. 
 
Press the       button on the 
remote to go to the next screen. 

Version 9/20/2007 

25 

 

www.VIZIO.com