JVC GZ-MC200 Manual De Instrucciónes

MasterPage: Body_Left

This camera’s 2-way power supply system lets you 
choose the most appropriate source of power. Do not use 
provided power supply units with other equipment.

Set the power switch to OFF while pressing down the 

lock button located on the switch.

Slide and hold OPEN in the direction of the arrow 

A

, 

then open the battery/CF card cover.

Insert the battery pack firmly into the battery pack 

mount until it locks into space as shown in the illustration.

Close the battery/CF card cover firmly until it locks.

Connect the AC adapter to the camera.

Plug the AC adapter into an AC outlet. The power/

charge lamp on the camera blinks to indicate charging 
has started.

When the power/charge lamp goes out, charging is 

finished. Unplug the AC adapter from the AC outlet. 
Disconnect the AC adapter from the camera.

Open the battery/CF card cover, and remove the battery 
pack while sliding BATTERY in the direction of the arrow 

B

.

 

Battery pack

Charging time

BN-VM200U (provided)

Approx. 1 hr. 35 min.

GZ-MC200US_03Start.fm  Page 14  Tuesday, September 14, 2004  9:59 AM