JVC GZ-MC200 Manual De Instrucciónes

MasterPage: Basic_Right

 

A

Black to S-VIDEO IN (Connect when your TV/VCR has 
S-VIDEO IN and A/V input connectors. In this case, it is 
not necessary to connect the yellow video cable.)

B

Yellow to VIDEO IN (Connect when your TV/VCR has 
only A/V input connectors.)

C

Red to AUDIO R IN*

D

White to AUDIO L IN*

* Not required for watching still images only.

Make sure all units are turned off.

Connect the camera to a TV or VCR as shown in the 

illustration.

If using a VCR, go to step 

3.

If not, go to step 

Connect the VCR output to the TV input, referring to 

your VCR’s instruction manual.

Turn on the camera, the VCR and the TV.

Set the VCR to its AUX input mode, and set the TV to 

its VIDEO mode.

Start playback on the camera. (

● Date/Time

Set [DATE/TIME] to [AUTO], [ON] or [OFF]. (

● Counter

Set [SCENE COUNTER] to [ON] or [OFF]. (

墌 pg. 26, 27)

(Pressing INFO button also turns on/off the displays.)

● It is recommended to use the AC Adapter as the power 

● To monitor the picture and sound from the camera without 

inserting a recording medium, set the camera’s power switch 
to 

, then set your TV to the appropriate input mode.

● Make sure you adjust the TV sound volume to its minimum 

level to avoid a sudden burst of sound when the camera is 
turned on.

● To connect the camera to a PC, refer to the software 

installation and USB connection guide.

Perform step 

1 to 6 above.

At the point you want to start dubbing, start recording 

on the VCR. (Refer to the VCR’s instruction manual.)

To stop dubbing, stop recording on the VCR, then stop 

playback on the camera.

GZ-MC200US_04Basic.fm  Page 25  Friday, September 10, 2004  11:55 AM