Alesis qs6.1 Guía De Referencia

Setup & Connections: Part 1

QS6.1 Reference Manual

15

If you want to link your QS6.1 directly with a PC or PC-Compatible, youÕll need special
serial driver software and cabling.

YouÕve already got the driver software Ñ itÕs in the \ALESIS\ASDWIN directory on
the CD-ROM that came with your QS6.1. (If you donÕt have a CD-ROM drive in your
computer, call Alesis Product Support and ask them to send you the software on a 3-1/2
inch floppy disk. ) Complete installation instructions come with the driver software.
The procedure will vary depending on your version of Windows.

The special cable can be purchased through Alesis Product Support. It has a DIN8
connector on one end and either a DB9 or DB25 connector on the other end (depending on
the type of connector that is on your PC.) The DIN8-to-DB9 cable is part # 9-96-1290.
The DIN8-to-DB25 cable is part # 9-96-1291.

Be aware that many PCs have more than one serial port, and some have both types of
connector. Before you order a cable from us you will need to (A) identify the port you
wish to hook up to, and (B) make certain it is not already in use by the computer.

You donÕt need a special cable to make a direct connection between your QS6.1 and a
Mac. Any standard Mac DIN-8 cable will do.

You will, however, have to choose between using the MODEM or PRINTER serial port
on the Mac. Plug into whichever one you arenÕt already using, and then make sure your
MIDI softwareÕs port selection is set to match.

If both ports are already in use, you can either (A) temporarily disconnect your modem
or printer, or (B) buy a multiple serial port box that will let you hook everything up to
your Mac and switch among these serial devices as needed.

 If you want to use the printer port for your direct serial link, first make certain

that AppleTalk is disabled.