Lorex LW2201 Manual De Usuario

 

10 

To install the camera: 

1.  Use the included mounting screws to 

mount the stand to the mounting 
surface:  

•  Mark the position of the screw holes 

on the wall.  

•  Drill holes and insert the drywall 

plugs as needed.  

•  Firmly attach the stand to the wall 

using the provided screws. 

 

2.  Slide the sunshade on the camera 

body. 

3.  Screw on the antenna to the back of 

the camera. 

 

4.  Attach the camera to the mounting 

stand. Tighten the thumbscrews to 
secure the camera to the stand. 
Adjust the angle of the camera until 
the desired view is set. 

 

5.  Connect the black power cable from 

the camera to the cable of the Power 
Adapter; plug the Power Adapter to 
an outlet or surge protector. 

 

 Note: You can install additional 
cameras (maximum of 4 cameras). 
When adding cameras that were not 
included in the original box, you will 
need to pair up the cameras with the 
receiver. Refer to the camera pairing 
section of this manual for more details. 

 
 
 
 
 
 
 
 
 
 
 

Figure 2.1 Attach the camera to the stand 

Figure 2.0 Attach stand to mounting surface