Brunton atlas Guía De Operación
18
1. Remove battery compartment cover.
2. Remove batteries, if present.
3. Hold unit upright in one hand. Use a thumbnail or fingernail to grab the
groove in the bottom of the MMC.
groove in the bottom of the MMC.
4. Drag the MMC from the slot into the battery compartment.
5. Hold Atlas face up and give it a shake to dump the MMC into your hand or
onto a work surface.
onto a work surface.
To add an MMC or SDC
1. Remove battery compartment cover.
1. Remove battery compartment cover.
2. Remove batteries, if present.
3. Hold unit upside down in one hand. Grasp the bottom corner of the MMC
with your other hand. The MMC label should be toward you.
with your other hand. The MMC label should be toward you.
4. Use the white lines and text on the circuit board as a guide and drop the
MMC into the slot.
MMC into the slot.
5. Gently shake the unit or use your finger to nudge the MMC into vertical
alignment. Then, gently push the card into the slot with your finger.
alignment. Then, gently push the card into the slot with your finger.
6. Replace the batteries and battery cover.