Brunton atlas Guía De Operación
54
route.
4.
5.
6.
Route creation sequence, continued: Fig. 4. Point (3) set at on-ramp turn. Fig. 5.
Waypoint (4) set at highway exit to frontage road leading to river. Waypoint (5)
ends the route at a tree stand in the hunting area. Fig. 6. Press EXIT to save the
route and you return to this screen.
5. Move the cursor to the next point in the route, a spot where you need to turn
or change direction, and press
or change direction, and press
ENT
to set the next waypoint.
6. Repeat step five until the route reaches your destination.
7. To save your route, press
EXIT
. Atlas reverts to the Route screen, with the
route automatically named "Route 1" and stored in Atlas's internal memory.
8. You can edit the name if you wish. Press
↑ to select the screen's command
box, then press
→ to
E
DIT
N
AME
|
ENT
. Press
↑ or ↓ to change the first character,
then press
→ to move the cursor to the next character and repeat until the
name is correct, then press
ENT
.
9. You can execute other route commands, such as
N
AVIGATE
. With the
command box active, just press
→ to highlight a different command, then press
ENT
.
10. If you are finished with the route for now, you can return to the last
page displayed by pressing
page displayed by pressing
EXIT
|
EXIT
|
EXIT
.
Delete a Route
1. From the
1. From the
N
AVIGATION
P
AGE
, press
MENU
|
ENT
or from the
M
AP
P
AGE
press
MENU
|
MENU
|
↓ to
R
OUTE
P
LANNING
|
ENT
.
2. Press
↓ to the route list|press ↓ or ↑ to select route name|
ENT
.
3. Press
← to
D
ELETE
|
ENT
|
← to
Y
ES
|
ENT
.
Save GPS Data Files to an MMC
1. Press
MENU
|
MENU
|
↓ to
S
YSTEM
S
ETUP
|
ENT
|
↓ to
T
RANSFER
M
Y
D
ATA
|
ENT
.
2. The Transfer My Data menu includes a message which tells you if an MMC
is present. If no MMC is present, you must first insert a card into Atlas in order
is present. If no MMC is present, you must first insert a card into Atlas in order