Brunton atlas Guía De Operación
64
Menus for changing Com Port settings.
For connectors and wiring information for another device, contact Brunton;
phone numbers are in the back of this manual. To set COM Port Configuration:
phone numbers are in the back of this manual. To set COM Port Configuration:
1. Press
MENU
|
MENU
|
↓ to
S
YSTEM
S
ETUP
|
ENT
.
2. Press
↓ to
C
OM
P
ORT
|
ENT
.
Coordinate System Selection
The Coordinate System Menu lets you select the coordinate system to use
when displaying and entering position coordinates. Access this function only in
Advanced Mode.
when displaying and entering position coordinates. Access this function only in
Advanced Mode.
Menus for changing coordinate system used to display positions.
To get to Coordinate System Selection:
1. Press
1. Press
MENU
|
MENU
|
↓ to
GPS S
ETUP
|
ENT
.
2. Press
↓ to
C
OORD
S
YSTEM
|
ENT
.
This unit can show a position in degrees (36.14952°); degrees, minutes and
thousandths of a minute (36° 28.700'); or degrees, minutes, seconds and
tenths of a second (36° 28' 40.9"). It can also show position in: UTM (Universal
Transverse Mercator) projection; MGRS (Standard); MGRS (Standard + 10);
Map Fix; Loran TD; British, Irish, Finnish, German, New Zealand, Swedish,
Swiss, Taiwan, Greek and Military grids.
thousandths of a minute (36° 28.700'); or degrees, minutes, seconds and
tenths of a second (36° 28' 40.9"). It can also show position in: UTM (Universal
Transverse Mercator) projection; MGRS (Standard); MGRS (Standard + 10);
Map Fix; Loran TD; British, Irish, Finnish, German, New Zealand, Swedish,
Swiss, Taiwan, Greek and Military grids.