Bizfon 2000 Guía Del Usuario

Bizfon Manual II: Administrator's Guide  

Administrator’s Menus 

Bizfon2000 and Bizfon4000 (SW Version 4.1.x) 

 

 

 
Add opens the Add Group page where a new group may be 
added. This page consists of the Group Name text field (requiring 
the group name) and the Group Description text field (requiring 
the optional group description), as well as standard Save and 
Back buttons to apply or abort changes.  

Edit opens the Edit Group page where the service parameters 
can be modified. It provides the same components as the Add 
Group page. To operate with Edit, only one record may be 
selected, otherwise the error message “One row must be selected” 
will appear. 

 Changing a group name will also change the 

references to this group, including groups where this group is a 
member of, and all affected filter rules (enabled and disabled ones, 
in all chains). Deleting a group will also delete any reference to the 
corresponding group, including filter-rules and member relations to 
the other groups. 
Clicking on the Group name will display an IP Pool Group 
Configuration page with the Members list for the current group.  

  

Fig. II-164: IP Pool configuration – Add Group page 

The  IP Pool Group Configuration page displays a list of all the 
added member IP addresses for the selected group. It offers the 
following components:  

Current Group provides read-only information about the current 
group name the members are listed for. 

Add opens the Add Member page where a new member may be 
added.  

Edit opens the Edit Members page where the service parameters 
can be modified. This page includes the same components as the 
Add Member page. To operate with Edit, only one record may be 
selected, otherwise the error message “One row must be selected” 
will appear. 

Fig. II-165: IP Pool Group Configuration page 

The Add Members page provides the following radio buttons:  

IPaddress requires the member IP address that is to be added to 
the group. 

IP Subnet requires the subnet specified by the IP address and the 
Maskbits. See above for more information about Maskbits. 

URL Address requires the member hostname to be added to the 
group. 

The  User-defined Group includes previously added groups that 
may also be added as a member to another group. 

Member description text fields can be used to enter an optional 
description of the member. 

Fig. II-166: IP Pool Group Configuration – Add Member  

 Select 

the 

Manage IP Pool Groups link on the Filtering Rules page.  

 

Click on the Add button on the IP Pool Configuration page. A page where a new group may be added will appear in the browser window.  

 

Define a group name in the Group Name text field and fill in the Group Description, if needed.  

 

To add a group with the given parameters, press Save. 

 Open 

the 

IP Pool Group Configuration page by clicking on the group name. 

 Select 

the 

Add button on the IP Pool Group Configuration page. A page opens where new members may be added to the group. 

 

Enter an IP address for the member in the IP Address text fields, select a IP subnet or IP group from the User defined Group drop down list to 
assign it to the currently selected group. 

 Enter 

a 

Member Description in the corresponding text field, if needed. 

 

To add a member with these parameters to the selected group press Save. 

 
 

 Select 

the 

Manage IP Pool Groups link. The IP Pool Configuration page appears with the table of groups (if any). 

 

Click on the desired members that should be deleted. The IP Pool Group Configuration list will appear. 

 

Check one or more checkboxes of the corresponding members that should be deleted from the Members table. Press Select all if all members 
should be deleted. 

 Press 

the 

Delete button on the IP Pool Group Configuration page. 

 

Confirm the deletion by pressing on Yes or cancel the deletion by pressing on No.