Alpine IVA-D300 Guía Del Usuario

-EN

Data Download

About SOUND SETUP Download

You can download data (from Alpine’s website) to a CD-R/CD-RW or
HDD, and download and store the data to the IVA-D300.
To start SOUND SETUP download, access the URL below and follow
the on-screen instructions.

http://www.alpine.com or http://www.alpine-europe.com
or http://www.alpine.com.au

Downloadable data

The file name of download data shall be
“A_U*****.MP3.”

A_U

∗∗∗∗∗.MP3

Extender (fixed)

Identifier (alphabet or number 5
letters maximum)

Header (fixed)

You can create a file name via the website. Do not change a
file name once it has been created. Malfunction may result.

• For details about procedures of download, see ALPINE’s Web site.
• If a external audio processor is connected, data that is downloaded

cannot be used.

Data is memorized in Preset 6 of the

Parametric EQ Mode.

Data is memorized in Preset 6 of the

Time Correction Mode.

Data is memorized in Preset 6 of the

crossover mode.

Parametric

equalizer

Time correction

Crossover

Adjusting Color of Picture

Setting item: COLOR
Setting content: -15 ~ +15

You can adjust the color between MIN (–15) and MAX (+15). When
it reaches the minimum or maximum point, the display shows "MIN"
or "MAX" respectively.

• Color adjustment can be made only in the navigation, DVD, AUX1

and AUX2 modes.

• Color adjustment cannot be made if a Navigation system with the

RGB feature is connected.

Adjusting Tint of Picture

Setting item: TINT
Setting content: G15 ~ R15

Adjust the color from G15 to R15. “G MAX” or “R MAX” is
displayed at the maximum of each color.

• Tint adjustment can be made only in the navigation, DVD, AUX1

and AUX2 modes.

• Tint adjustment cannot be made if a Navigation system with the

RGB feature is connected.

Adjusting Image Contrast

Setting item: CONTRAST
Setting content: -15 to +15

Adjustment of contrast is done in the range of -15 to +15.
“HIGH” and “LOW” appear as the maximum and minimum
values specified.

Adjusting Picture Quality

Setting item: SHARP
Setting content: -15 to +15

Adjustment of picture quality is done in the range of -15 to
+15. “HARD” and “SOFT” appear as the maximum and
minimum values specified.

• Picture quality adjustment can be made only in the navigation,

DVD, AUX1 and AUX2 modes.

• Picture quality adjustment cannot be made if a Navigation system

with the RGB feature is connected.

Storing VISUAL EQ

You can store the settings made for “Adjusting Image Brightness,
Tint, Depth, Picture Quality and Contrast.”

Setting item: USER MEMORY
Setting content: P-1/P-2

1 After completing “Adjusting Brightness, Tint, Depth,

Picture Quality, and Contrast” (this page), touch [;] or
[:] of USER MEMORY and then select preset No. [P-1]
or [P-2] to which the settings are to be stored.

2 After selecting a preset No., touch [WRITE].

The adjusted VISUAL EQ mode is stored by the above
operations.

• You can recall the VISUAL EQ mode stored here from P-1 or P-2

of “Selecting the VISUAL EQ Mode” (page 40).