Delfield mdbr1-gh Instruccion De Instalación

2

3

RECEIVING AND INSPECTING UNIT ................................................. 2
MECHANICAL DATA ....................................................................... 3-7
INSTALLATION............................................................................... 8-9
OPERATION .................................................................................... 10
ROUTINE MAINTENANCE .......................................................... 10-11
DEFROST TIMER............................................................................. 12
PARAGON TIMER............................................................................ 13
ERC CONTROL................................................................................ 14
WIRING DIAGRAM..................................................................... 15-19
REPLACEMENT PARTS LIST...................................................... 20-22
STANDARD LABOR GUIDELINES.................................................... 23
STANDARD WARRANTIES.............................................................. 24
NOTES ............................................................................................ 25
AUTHORIZED PARTS DEPOTS..........................................BACK PAGE

On refrigeration, freezer and heated storage units, the serial tag is 

located inside the right most door (the only door on a one-door unit), 

near the top front corner of the right interior wall.

Always have the serial number of your unit available when calling for 

parts or service.  A complete list of authorized Delfield parts depots is 

shown on the back cover of this manual.

Even though most equipment is shipped crated, care should 

be taken during unloading so the equipment is not damaged 

while being moved into the building.

1.  Visually inspect the exterior of the package and skid or 

container.  Any damage should be noted and reported 

to the delivering carrier immediately.

2.  If damaged, open and inspect the contents with the 

carrier.

3.  In the event that the exterior is not damaged, yet upon 

opening, there is concealed damage to the equipment 

notify the carrier.  Notification should be made verbally 

as well as in written form.

4.  Request an inspection by the shipping company of the 

damaged equipment.  This should be done within 10 

days from receipt of the equipment.

5.  Check the lower portion of the unit to be sure legs or 

casters are not bent.

6.  Also view the compressor compartment housing and 

visually inspect the refrigeration package.  Be sure lines 

are secure and base is still intact.

7.  Freight carriers can supply the necessary damage forms 

upon request.

8.  Retain all crating material until an inspection has been 

made or waived.