Canon MF5550 Guía Del Software
Scanning with the TWAIN Driver
3-6
Scanning
3
Setting Preferences in the TWAIN Driver
In the TWAIN driver dialog box, you can specify the following scan settings.
[Use Automatic Document Feeder]
Uses the ADF to scan the document. Selecting this check box will
make the maximum scanned area larger.
make the maximum scanned area larger.
[Paper Size]
Selects the scanned area in the pull-down list. Available scanned
areas are as follows:
- For using the platen glass: 4
areas are as follows:
- For using the platen glass: 4
×
6, 6
×
4, A4, B5, Business Card,
Custom, US Letter
- For using the ADF: A4, B5, Custom, US Legal, US Letter
[Standard Preset]
Selects the preset scan settings, either [Photo] (the resolution of 300
dpi, Color) or [Document] (the resolution of 200 dpi Black/White).
dpi, Color) or [Document] (the resolution of 200 dpi Black/White).
[Resolution]
Selects the scanning resolution in dot per inch. Available resolutions
are as follows:
- For using the platen glass: 50, 72, 100, 150, 200, 300, 400, 500, 600,
are as follows:
- For using the platen glass: 50, 72, 100, 150, 200, 300, 400, 500, 600,
1200, 2400, 4800, 9600
- For using the ADF: 50, 72, 100, 150, 200, 300
[Color Type]
Selects the scanning color type ([Black/White], [Gray], or [Color]).
[Contrast]
Specifies the contrast (–35 to 35%). (Only for color or grayscale
scanning.)
scanning.)
NOTE
You can also adjust the contrast in PageManager or OmniPage if it
is not specified sufficiently in this dialog box.
is not specified sufficiently in this dialog box.