Canon iPF6450 Manual
Cause
Corrective Action
The Paper Feed Slot used to load the
sheet is different from the Paper Feed Slot
specified in Paper Source in the printer
driver.
sheet is different from the Paper Feed Slot
specified in Paper Source in the printer
driver.
2.
Load the paper in the Paper Feed Slot specified in the printer driver.
The printer will resume printing.
The printer will resume printing.
Change the printer driver Paper Source setting to match the Paper Feed Slot where the sheet is
loaded as follows.
loaded as follows.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2.
In the printer driver, change the Paper Source setting to match the Paper Feed Slot where
the sheet is loaded, and then resend the print job.
the sheet is loaded, and then resend the print job.
Paper jam.
Paper jam.
Cause
Corrective Action
A paper jam occurred
in the printer during
printing.
in the printer during
printing.
1.
Cut the paper on the upper side of the Paper Feed Slot.
2.
Press the OK button.
3.
Remove the jammed paper.
4.
Load the paper.
5.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
Printing will resume, starting from the page on which the error occurred.
Paper loaded askew.
Paper loaded askew.
Cause
Corrective Action
Paper loaded crooked was detected when the paper was advanced.
Press the OK button and reload the paper.
If this error recurs after you reload the roll, re-
move the Roll Holder from the printer, push the
roll firmly in until it touches the Roll Holder
flange, and reload the Roll Holder in the print-
er.
move the Roll Holder from the printer, push the
roll firmly in until it touches the Roll Holder
flange, and reload the Roll Holder in the print-
er.
Important
•
To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loose in the
Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems because paper may be
askew when printed. Also, the Platen may become soiled, which may soil the back of the next document when it is printed.
Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems because paper may be
askew when printed. Also, the Platen may become soiled, which may soil the back of the next document when it is printed.
Paper not aligned with right guide.
Paper not aligned with right guide.
Cause
Corrective Action
Skew Check Lv. on the Control Panel menu is set to something other than Off and the
paper is not aligned with the guide on the right during loading.
paper is not aligned with the guide on the right during loading.
Follow these steps to reload the sheet.
1.
Press the OK button to clear the error.
2.
Reload the paper.
iPF6450
Paper jam.
Error Message
Messages regarding paper
1015