LXE mx6 Guía De Referencia
Settings Options
111
E-EQ-MX6RG-E
MX6 Reference Guide
Advanced Tab
Access:
Start | Settings | System tab | Scanner | Advanced tab
Version 7.11
Version 7.13
Figure 4-31 Scanner – Advanced Tab
The operation of these parameters differs for Key Message and Block modes. The mode is
determined by the Send key Message (Wedge) parameter on the Main tab:
determined by the Send key Message (Wedge) parameter on the Main tab:
Send Key Message (Wedge)
Mode
Group Box Title
Enabled
Key Message
Key Message
Disabled Block
Block
Key Message mode sends the prefix, barcode, and suffix as keystrokes to the application with the
input focus.
input focus.
In Block mode the prefix and suffix are added to the beginning and end of the buffered barcode
data that can then be read from the WDG0: device by an application.
data that can then be read from the WDG0: device by an application.
The title of the group box containing the Prefix and Suffix reflects the currently selected mode.
Key Message is displayed when in Key Message mode and Block is displayed when in Block
mode.
Key Message is displayed when in Key Message mode and Block is displayed when in Block
mode.
Adjust the settings and click the OK box to save the changes. The changes take effect
immediately.
immediately.
Translate Control Codes
Translate Control Codes checkbox is available on the Advanced tab in Version 7.11. The
equivalent checkbox is located on the Control Characters tab in Version 7.13 as Translate All.
equivalent checkbox is located on the Control Characters tab in Version 7.13 as Translate All.
Translate Control Codes is only available in Key Message mode. If “Translate Control Codes” is
enabled, unprintable ASCII characters (characters below 20H) in scanned barcodes are translated
to their appropriate control code key sequence.
enabled, unprintable ASCII characters (characters below 20H) in scanned barcodes are translated
to their appropriate control code key sequence.
When “Translate Control Codes” is disabled and “Send Key Messages (WEDGE)” is enabled,
unprintable ASCII characters in scanned barcodes are discarded. Unprintable ASCII characters are
passed through as is to the reading application in Block mode.
unprintable ASCII characters in scanned barcodes are discarded. Unprintable ASCII characters are
passed through as is to the reading application in Block mode.