LXE mx6 Guía De Referencia
30
ActiveSync – Initial Setup
MX6 Reference Guide
E-EQ-MX6RG-E
ActiveSync – Initial Setup
The following instructions relate to the initial setup of ActiveSync. Once a relationship between
the MX6 and a desktop/laptop has been established, tap Start | Help | ActiveSync for help.
the MX6 and a desktop/laptop has been established, tap Start | Help | ActiveSync for help.
Note: You must establish a partnership between the MX6 and a desktop computer prior to
running ActiveSync to connect using IrDA or Radio. The initial partnership must be done
using direct serial or USB cable connection.
using direct serial or USB cable connection.
Install ActiveSync on Desktop/Laptop
Go to the Microsoft Windows website ActiveSync Download | Install file location:
www.microsoft.com/downloads
and type ActiveSync in the Keywords text box. This process should locate the latest version of
ActiveSync. Install ActiveSync 3.7 (or later) on the desktop or laptop computer before using
ActiveSync to connect the desktop computer to the MX6.
ActiveSync. Install ActiveSync 3.7 (or later) on the desktop or laptop computer before using
ActiveSync to connect the desktop computer to the MX6.
Follow the instructions in the ActiveSync Wizard.
Check that Start | ActiveSync | Tools | Options has the correct connection selected. Refer to
“Serial Connection” or “USB Connection”.
“Serial Connection” or “USB Connection”.
Note: By default, ActiveSync does not automatically synchronize all types of information. Use
ActiveSync Options to specify the types of information you want to synchronize. The
synchronization process makes the data (in the information types you select) identical on
both your desktop computer and your device.
synchronization process makes the data (in the information types you select) identical on
both your desktop computer and your device.
When installation of ActiveSync is complete on your desktop computer, the ActiveSync Setup
Wizard begins and starts the following processes:
Wizard begins and starts the following processes:
•
connect your device to your desktop computer,
•
set up a partnership so you can synchronize information between your device and your
desktop computer, and
desktop computer, and
•
customize your synchronization settings.
Because ActiveSync is already installed on the MX6, the first synchronization process begins
automatically when you finish setting up your desktop computer in the ActiveSync wizard.
automatically when you finish setting up your desktop computer in the ActiveSync wizard.
Troubleshooting
If the MX6 is already in a docking cradle connected to a PC with a serial or USB cable, remove
and reinsert the MX6 into the cradle.
and reinsert the MX6 into the cradle.
If the MX6 is directly connected to a PC by RS-232 or USB cable, disconnect the cable from the
MX6 and reconnect.
MX6 and reconnect.
Serial Connection
Select Start | ActiveSync | Tools | Options. At the PC tab, tap the Options button. Enable the
“When cradled” checkbox. From the dropdown list, choose “57600 Default” and tap OK. This will
set up the MX6 for serial connection.
“When cradled” checkbox. From the dropdown list, choose “57600 Default” and tap OK. This will
set up the MX6 for serial connection.
Note:
The default is 57600 baud.