Canon LBP-1000 Guía Del Usuario

Shaded menus appear after an option has been installed. E.g. A-32 module with 
the Adobe PostScript 3 software.

If there is insufficient memory, MEMCONFIG may not appear, even after the A-32 
module has been installed.

Press Go to take the printer off-line

Press Menu to display the first menu name

JAM RECOVERY allows printing to resume automatically once a paper jam has been
removed. JAM RECOVERY can be set for PCL and PostScript personalities.

The printer does not resume printing automatically after the paper
jam has been removed. You must start the print again. You may

want to use this setting to conserve memory.

The printer reserves enough memory to hold the data for the page

that jams and automatically reprints the page that jammed. With
this setting, printing speed is slightly slower. Use this setting if

there is sufficient memory available.

AUTOCONT (automatic continue) determines how the printer reacts to errors. If the

printer is part of a network or remote spooling system, then set AUTOCONT=ON.

The printer displays a message, goes off-line for about 10 seconds

and then automatically goes back on-line and resumes printing.

The printer displays a message, goes off-line and waits for you to

correct the problem. Press 

 to resume operation.

JAM RECOVERY=
OFF

*

CONFIG MENU
AUTOCONT=ON

*