Ricoh 3224C Guía De La Red

Remote Maintenance by telnet

dhcp

Use the "dhcp" command to config-
ure DHCP settings.

❖

❖ View settings

The following command displays
the current DHCP settings.

msh> dhcp

❖

❖ Configuration

You can configure DHCP.

msh> dhcp “interface_name”
{on|off}

• Click {on} to enable dhcp. Click

{off} to disable DHCP.

• If the DNS server address and

domain name are obtained from
DHCP, be sure to click {on}.

• ip1394 can be specified only

when the IEEE 1394 interface is
installed.

• wlan can be specified only

when the IEEE 802.11b interface
is installed.

❖

❖ Current interface priority configura-

tion display

msh> dhcp priority

❖

❖ Interface priority configuration

m s h > d h c p p r i o r i t y
“interface_name”

• You can select which interface

has DHCP parameter priority.

• Priority settings are available

when multiple interfaces are in-
stalled.

❖

❖ DNS server address selection

msh> dhcp dnsaddr {dhcp |
static}

• Specify whether to obtain the

DNS server address from the
DHCP server or use the address
set by a user.

• To obtain the DNS server address

from the DHCP server, specify
"dhcp". To use the address set by
a user, specify "static".

❖

❖ Domain name selection

msh> dhcp domainname {dhcp
| static}

• Specify whether to obtain the

domain name from the DNS
server or use the domain name
set by a user.

• To obtain the domain name from

the DHCP server, specify "dhcp".
To use the domain name set by a
user, specify "static".

Reference
For details about DHCP functions,
see p.139 “Using DHCP”.
For details about setting the DNS
server address, see p.92 “dns”.
For details about setting the do-
main name, see p.93 “domain-
name”.

Interface name

Interface config-
ured

ether

Ethernet interface

ip1394

IEEE 1394 interface

wlan

IEEE 802.11b inter-
face