Ricoh 1027 Guía De La Red
Message List
105
2
Message List
This is a list of messages that appear in the machine's system log. The system log
can be viewed using the "syslog" command.
can be viewed using the "syslog" command.
System Log Information
Use the following command to display the system log information:
• UNIX: Use the "syslog" command and "rsh", "rcp", “ftp”, and "sftp" parameters.
• telnet : Use the “syslog” command.
• UNIX: Use the "syslog" command and "rsh", "rcp", “ftp”, and "sftp" parameters.
• telnet : Use the “syslog” command.
Message
Problem and solutions
Access to NetWare server <file server name>
denied. Either there is no account for this print
server on the NetWare server or the password
was incorrect.
denied. Either there is no account for this print
server on the NetWare server or the password
was incorrect.
(In the print server mode) Login to the file
server failed.Make sure that the print server is
registered on the file server. If a password is
specified for the print server, delete it.
server failed.Make sure that the print server is
registered on the file server. If a password is
specified for the print server, delete it.
account is unavailable:
Same account name be used.
User account is disabled. This could be be-
cause it use the same account name as the ad-
ministrator account.
cause it use the same account name as the ad-
ministrator account.
account is unavailable:
The authentication password is not set up.
User account is disabled. This could be be-
cause the authentication password is not set,
and only the encryption account is set.
cause the authentication password is not set,
and only the encryption account is set.
account is unavailable:
encryption is impossible.
Encryption is not possible and account is disa-
bled. This could be because:
bled. This could be because:
• Security option is not installed.
• Encryption password has not been specified.
add_sess_IPv4: bad trap <IPv4 address>com-
munity <community name>
munity <community name>
The IPv4 address (0.0.0.0.) is unavailable when
the community access type is TRAP. Specify
the host IPv4 address for the TRAP destination.
the community access type is TRAP. Specify
the host IPv4 address for the TRAP destination.
add_sess_IPv6: bad trap <IPv6 address>com-
munity <community name>
munity <community name>
The IPv6 address [::] is unavailable when the
community access type is TRAP. Specify the
host IPv6 address for the TRAP destination.
community access type is TRAP. Specify the
host IPv6 address for the TRAP destination.
add_sess_IPv4: community<community
name> already defined.
name> already defined.
The same community name already exists.
Use another community name.
Use another community name.
add_sess_IPv6: community <community
name> already defined.
name> already defined.
The same community name already exists.
Use another community name.
Use another community name.
add_sess_IPX: bad trap<IPX address>commu-
nity <community name>
nity <community name>
The IPX address (00:00:00:00:00:00) is unavail-
able when the community access type is
TRAP. Specify the host IPX address for the
TRAP destination.
able when the community access type is
TRAP. Specify the host IPX address for the
TRAP destination.
add_sess_ipx: community <community-
name> already defined.
name> already defined.
The same community name already exists.
Use another community name.
Use another community name.
Attach FileServer= <file servername>
Connection to the file server as the nearest
server has been established.
server has been established.