Ricoh 1027 Guía De La Red
Using a Printer Server
26
1
Setting Up as a Print Server
(NetWare 3.x)
(NetWare 3.x)
Follow the procedure below to con-
nect the machine as a print server us-
ing NetWare 3.x.
nect the machine as a print server us-
ing NetWare 3.x.
A
Log on to the file server as a su-
pervisor or supervisor equivalent.
pervisor or supervisor equivalent.
B
Start NIB Setup Tool from the
[Start]
[Start]
menu.
C
Click [Wizard], and then click [OK].
D
Select the printer you want to con-
figure, and then click [Next].
A dialog box prompting you to
perform the remaining configura-
tion tasks in the Web browser ap-
pears. Click [OK], and then wait
until Web Image Monitor starts au-
tomatically.
figure, and then click [Next].
A dialog box prompting you to
perform the remaining configura-
tion tasks in the Web browser ap-
pears. Click [OK], and then wait
until Web Image Monitor starts au-
tomatically.
E
Cick [Login].
A dialog box for entering the login
user name and password appears.
A dialog box for entering the login
user name and password appears.
F
Enter the login user name and
password, and then click [Login].
For details about the login user
name and password, consult your
network administrator.
password, and then click [Login].
For details about the login user
name and password, consult your
network administrator.
G
Click [Configuration] in the left ar-
ea, and then click [NetWare].
• Print Server Name: Enter the
ea, and then click [NetWare].
• Print Server Name: Enter the
NetWare print server name. To
use the interface board as a
print server, enter the name of a
print server that is not active on
the file server. Use up to 47
characters.
use the interface board as a
print server, enter the name of a
print server that is not active on
the file server. Use up to 47
characters.
• Logon Mode: Specify whether
to designate a file server or NDS
tree when logging on to Net-
Ware.
tree when logging on to Net-
Ware.
• File Server Name: When a file
server name is entered here,
only the specified file server is
searched for. This item is man-
datory. Use up to 47 characters.
only the specified file server is
searched for. This item is man-
datory. Use up to 47 characters.
• NDS Tree: To enable NDS mode,
enter the name of the NDS tree
you want to log on to. Use up to
32 alphanumeric characters.
you want to log on to. Use up to
32 alphanumeric characters.
• NDS Context Name: To enable
NDS mode, enter the print server
context. Use up to 127 characters.
context. Use up to 127 characters.
• Operation Mode: Specify wheth-
er to use the interface board as a
print server or a remote printer.
print server or a remote printer.
• Remote Printer No.: This item is
effective when the interface
board is specified as a remote
printer. Enter the same number
as the number of the printer to
be created on the print server (0
to 254 characters).
board is specified as a remote
printer. Enter the same number
as the number of the printer to
be created on the print server (0
to 254 characters).
• Job Timeout: When the interface
board is used as a NetWare re-
mote printer, the printer cannot
detect when a print job ends.
Therefore, the printer termi-
nates printing when a certain
period of time has elapsed since
it last received print data (i.e.,
when it has not received print
data for a certain period of
time). Specify here this period
of time (3 to 255 seconds). The
initial value is 15 (seconds).
mote printer, the printer cannot
detect when a print job ends.
Therefore, the printer termi-
nates printing when a certain
period of time has elapsed since
it last received print data (i.e.,
when it has not received print
data for a certain period of
time). Specify here this period
of time (3 to 255 seconds). The
initial value is 15 (seconds).
• Frame Type: Select the frame type
from the drop-down menu.
• Print Server Protocol: Select the
protocol for NetWare from the
drop-down menu.
drop-down menu.
• NCP Delivery Protocol: Select
the protocol for NCP delivery.