Ricoh 1027 Guía De La Red

Monitoring and Configuring the Printer

68

• wlan can be specified only

when the IEEE 802.11b interface
is installed.

❖ Initializing the printer name for each

Use the "ifconfig" command to view
and configure TCP/IP (IP address,
subnet mask, broadcast address, de-
fault gateway address) for the printer.

❖ View settings

❖ IPv4 Configuration

• If you did not enter an interface

name, it is automatically set to
the Ethernet interface.

• ip1394 can be specified only

when the IEEE 1394 interface is
installed.

• wlan can be specified only

when the IEEE 802.11b interface
is installed.

The following explains how to
c o n f i g u r e   a n   I P v 4   a d d r e s s
192.168.15.16 on Ethernet inter-
face.

❖ IPv6 Configuration

msh> ifconfig ether inet6
interface_name ” “printer
_name”
The following explains how to
c o n f i g u r e   a   I P v 6   a d d r e s s   t o
2001:DB8::100 with prefix length
64 on the Ethernet interface.

❖ Netmask configuration

msh> ifconfig “interface
_name” netmask “address”
The following explains how to con-
figure a subnet mask 255.255.255.0
on Ethernet interface.

❖ Broadcast address configuration

ether

Ethernet interface

ip1394

IEEE 1394 interface

wlan

IEEE 802.11b inter-
face

ether

Ethernet Interface

ip1394

IEEE 1394 Inter-
face

wlan

IEEE 802.11b Inter-
face