Ricoh 1027 Guía De La Red
Monitoring and Configuring the Printer
74
2
show
Use the "show" command to display
network interface board configura-
tion settings.
network interface board configura-
tion settings.
❖ View settings
msh> show
• If "-p" is added, you can view
settings one by one.
Reference
slp
Use “slp” command to view and con-
figure SLP settings.
figure SLP settings.
msh> slp ttl “ttl_val”
• You can search the NetWare server
using SLP in the PureIP environ-
ment of NetWare 5/5.1. Using the
"slp" command, you can configure
the value of TTL which can be used
by SLP multicast packet.
ment of NetWare 5/5.1. Using the
"slp" command, you can configure
the value of TTL which can be used
by SLP multicast packet.
• The default value of TTL is 1. A
search is executed only within a lo-
cal segment. If the router does not
support multicast, the settings are
not available even if the TTL value
is increased.
cal segment. If the router does not
support multicast, the settings are
not available even if the TTL value
is increased.
• The acceptable TTL value is be-
tween 1 and 255.
smb
Use the “smb” command to configure
or delete the computer or workgroup
name for SMB.
or delete the computer or workgroup
name for SMB.
❖ Computer Name settings
msh> smb comp “computer
name”
name”
• Set computer name using up to
15 characters. Names beginning
with "RNP" or "rnp" cannot be
entered.
with "RNP" or "rnp" cannot be
entered.
❖ Working Group Name settings
msh> smb group “work group
name”
name”
• Set workgroup name using up
to 15 characters
❖ Comment settings
msh> smb comment “comment”
• Set comment using up to 31
characters.
❖ Notify print job completion
msh> smb notif {on | off}
• To notify print job completion,
specify “on”. Otherwise, specify
“off”
“off”
❖ Deleting Computer Name
msh> smb clear comp
❖ Deleting Group Name
msh> smb clear group
❖ Deleting Comment
msh> smb clear comment
❖ View Protocol
msh> smb protocol