Ricoh 1027 Guía De La Red

Remote Maintenance by telnet

81

Use the "wiconfig" command to make
settings for IEEE 802.11b.

❖ View settings

❖ View IEEE 802.11b settings

• If IEEE 802.11b is not working

correctly, its information is not
displayed.

❖ Configuration

mode [ap|ad-
hoc|802.11adhoc]

You can set the in-
frastructure 
mode(ap) , the 
802.11 Adhoc 
mode 
(802.11adhoc), or 
the ad hoc mode 
(adhoc).

The default is ad 
hoc mode.

ssid “IDvalue” 

You can make set-
tings for the SSID 
in the infrastruc-
ture mode.

Usable characters 
are ASCII 0x20-
0x7e (32 bytes).

An SSID value is 
set automatically 
to the nearest ac-
cess point if no set-
ting is made.

If no setting is 
made for the 
802.11 ad hoc 
mode, the same-
value as for the in-
frastructure mode 
or an ASSID value 
is automatically 
set. The default is 
blank.

channel frequency 
“channelno.” 

You can enable or 
disable the WEP 
function. To enable 
the WEP function, 
specify [on]; to dis-
able it, specify [off].

To start the WEP 
function, enter the 
correct WEP key. 
The default is “11”.

key [ “key value” ] 
val [1|2|3|4]

You can specify 
the WEP key when 
entering in hexa-
decimal.

With a 64-bit WEP, 
you can use 10 digit 
hexadecimals. 
With a 128-bit 
WEP, you can use 
26 digit hexadeci-
mals.

Up to four WEP 
keys can be regis-
tered. Specify the 
number to be reg-
istered with “val”.

When a WEP is 
specified by key, 
the WEP specified 
by key phrase is 
overwritten.

To use this func-
tion, set the same 
key number and 
WEP key for all 
ports that transmit 
data to each other. 
Put “0x”on the 
front of WEP key.

You can omit the 
numbers with 
“val”. The key 
number is set to 1 
when making 
these omissions. 
The default is 
blank.