Ricoh 1027 Guía De Referencia
Appendix
112
10
Placing Originals
To correctly display the top/bottom orientation of the scanned original on a cli-
ent computer, the placement of the original and the settings made on the control
panel and scanner driver must match.
There are two orientations for placing the original. See the table below.
ent computer, the placement of the original and the settings made on the control
panel and scanner driver must match.
There are two orientations for placing the original. See the table below.
Note
❒ Normally, an original is or , but in the table below, a square original is
used to make original orientation easy to understand. If the actual shape of
the original is different, the combination of original orientation and the orien-
tation specified on the control panel or scanner driver does not change.
the original is different, the combination of original orientation and the orien-
tation specified on the control panel or scanner driver does not change.
An original to be scanned
Decide the placement method.
Exposure glass
ADF
Place the original.
(There are two original orienta-
tions.)
tions.)
Place the
original so
that the top
edge touches
the rear of the
exposure
glass.
original so
that the top
edge touches
the rear of the
exposure
glass.
Place the
original so
that the top
edge touches
the back of
the ADF.
original so
that the top
edge touches
the back of
the ADF.
Speci-
fy the
orien-
tation.
fy the
orien-
tation.
When scanning using
the e-mail function, the
Scan to Folder func-
tion, the Store function,
or the delivery scanner
function
the e-mail function, the
Scan to Folder func-
tion, the Store function,
or the delivery scanner
function
(Specified on the con-
trol panel screen)
trol panel screen)
When scanning using
the TWAIN scanner
function
the TWAIN scanner
function
(Specified in the Scan-
ner Control dialog box)
ner Control dialog box)