Ricoh 3224C Guía Del Usuario

R CAUTION:

• Protect the machine from dampness or wet weather, such as rain and snow.

• Keep the machine away from humidity and dust. Otherwise a fire or an elec-

tric shock might occur.

• Do not place the machine on an unstable or tilted surface. If it topples over,

an injury might occur.

• If you use the machine in a confined space, make sure there is a continuous

air turnover.

• Unplug the power cord from the wall outlet before you move the machine.

While moving the machine, you should take care that the power cord will not
be damaged under the machine.

• When you disconnect the power plug from the wall outlet, always pull the

plug (not the cable).

• Do not allow paper clips, staples, or other small metallic objects to fall inside

the machine.

• Keep toner (used or unused) and toner bottle out of the reach of children.

• If toner or used toner is inhaled, gargle with plenty of water and move into a

fresh air environment. Consult a doctor if necessary.

• If toner or used toner gets into your eyes, flush immediately with large

amounts of water. Consult a doctor if necessary.

• If toner or used toner is swallowed, dilute by drinking a large amount of wa-

ter. Consult a doctor if necessary.

• Avoid getting toner on your clothes or skin when removing a paper jam or

replacing toner. If your skin comes into contact with toner, wash the affected
area thoroughly with soap and water.

• If toner gets on your clothing, wash with cold water. Hot water will set the

toner into the fabric and may make removing the stain impossible.

• If your skin comes into contact with toner or used toner, wash the affected

area thoroughly with soap and water.

• For environmental reasons, do not dispose of the machine or expended

supply waste at household waste collection points. Disposal can take place
at an authorized dealer.

• The inside of the machine could be very hot. Do not touch the parts with a

label indicating “hot surface”. Otherwise, an injury might occur.

• The fusing section of this machine might be very hot. Caution should be tak-

en when removing misfed paper.

• The fusing unit becomes very hot. When installing a new fuser oil unit, turn

off the machine and wait about an hour. After that, install the new fuser oil
unit. Not waiting for the unit to cool could result in a burn.

• Keep the fuser oil unit away from flames. There is a risk of fire or burns.

• Keep the waste oil bottle away from flames. There is a risk of fire or burns.

ThemisC1_EN_zentai_pre_FM.book Page 13 Thursday, June 30, 2005 8:21 PM