Ricoh 3224C Guía Del Usuario
19
1. Getting Started
Guide to Components
1.
Auto Document Feeder (ADF)
Lower the ADF over originals placed on
the exposure glass. If you have the ADF,
load a stack of originals here. They will
be fed automatically, one by one.
the exposure glass. If you have the ADF,
load a stack of originals here. They will
be fed automatically, one by one.
2.
Exposure glass
Place originals face down.
3.
Internal tray
Copied, printed paper or fax messages
are delivered here.
are delivered here.
4.
Main power switch
If the machine does not operate after turning
on the operation switch, check the main pow-
er switch is turned on. If it is off, turn it on.
on the operation switch, check the main pow-
er switch is turned on. If it is off, turn it on.
5.
Operation switch
Press this switch to turn the power on
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off).
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off).
6.
Control panel
See p.23 “Control Panel”.
7.
Remove Paper Indicator
The indicator is lit when paper is output
to the internal tray 2 (1 bin tray). If the in-
ternal tray 2 has not been installed, the in-
dicator does not light.
to the internal tray 2 (1 bin tray). If the in-
ternal tray 2 has not been installed, the in-
dicator does not light.
8.
Internal tray 2 (1 bin tray) (optional)
9.
Front cover
Open to access the inside of the machine.
10.
Paper tray (upper:Tray 1, low-
er:Tray 2)
Load paper here.
11.
Paper tray unit (optional up-
per:Tray3, lower:Tray4>)
Load paper here.
AFT044S
ThemisC1_EN_zentai_pre_FM.book Page 19 Thursday, June 30, 2005 8:21 PM