Ricoh 1027 Guía Del Software

Monitoring and Configuring the Printer

187

• The “Port” specifies the port number of the direct printing port.

• The “bidirect” setting indicates whether the direct printing port is bidirec-

tional or not.

❖ Setting timeout

• You can specify the timeout interval to use when the printer is expecting

data from the network.

• The default is 300 seconds.

❖ Setting bidirect

• You can specify whether the direct printing port is bidrectional or not.

Use the “dns” command to configure or display DNS (Domain Name System)
settings.

❖ View settings

The following command displays current DNS settings:

❖ DNS server configuration

The following command enables or disables the DNS server address:

msh> dns “number” server “server address”
The following command displays a configuration using the IP address
192.168.15.16 on a DNS 1 server:

• You can register up to three DNS server numbers.

• You cannot use “255.255.255.255” as the DNS server address.

❖ Dynamic DNS function setting

• You can set the dynamic DNS function “active” or “inactive”.

• {on} means “active” and {off} means “inactive”.

• ip1394 can be specified only when the IEEE 1394 interface is installed.

• wlan can be specified only when the IEEE 802.11b interface is installed.

Interface name

Interface configured

ether

Ethernet interface

ip1394

IEEE 1394 interface