Ricoh 1027 Guía Del Software
Monitoring and Configuring the Printer
220
❒ For details about UNIX commands and parameters, see UNIX Supplement.
❒ For details about mshell prnlog commands, see
❒ For details about mshell prnlog commands, see
.
Configuring the Network Interface Board
Use the following command to display network interface board settings:
• telnet : Use the “show” command.
Result
Print Request Result
Communication Result
•
OK
Print was completed normally. However, the print result may
not be as required due to printer problems.
Print was completed normally. However, the print result may
not be as required due to printer problems.
•
NG
Printing was not completed normally.
Printing was not completed normally.
•
Canceled
An “rcp”, “rsh”, or “lpr” command print request was canceled,
possibly due to the printing application. Not applicable to the
“ftp” or “rprinter” command.
An “rcp”, “rsh”, or “lpr” command print request was canceled,
possibly due to the printing application. Not applicable to the
“ftp” or “rprinter” command.
Time
Time the print requested was received.
Time of print request reception
User ID
Printer driver-configured User ID.
Appears when the print request ID is specified.
JobName
Name of the document for printing
Appears when the print request ID is specified.
Item
Description
Common
mode
Protocol Up/Down
[up] means “active” and [down] means “inactive”.
appletalk
TCP/IP
netware
SMB
IP over 1394
SCSI print
Ethernet interface
Internal version number
Syslog priority
NVRAM version
Internal version number
Item
Description