Ricoh 1027 Guía Del Software
Preparing for Printing
57
The details shown in [Comment:], [Driver:], and [Port:] vary depending on the
operating system, printer model, and port.
operating system, printer model, and port.
H
Click [Port:], and then click [Add].
I
Click [Network Printer], and then click [OK].
J
Double-click the name of the NetWare file server on the network tree.
The created queue is displayed.
K
Select the print queue, and then click [OK].
L
Check that the port of the selected printer is displayed in [Port:].
M
Click [Finish].
The printer driver installation starts.
N
Click [Finish] in the [Component selection] dialog box.
O
Click [Finish] in the [Introduction complete] dialog box.
P
In the [Printers] window, open the printer properties.
Under Windows XP or Windows Server 2003, open the printer properties from
the [Printers and Faxes] window.
the [Printers and Faxes] window.
Q
On the [Printer Settings] tab, clear the [Form Feed] and [Enable Banner] check
boxes.
boxes.
Under Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, click
the [NetWare setting] tab.
the [NetWare setting] tab.
Do not select these check boxes since they are automatically selected by the
printer driver. If you select the check boxes, the printer may not print correctly.
printer driver. If you select the check boxes, the printer may not print correctly.
R
Click [OK] to close the printer properties dialog box.
❒ The protocol is set to inactive as default. Enable it using Web Image Mon-
itor or Telnet
When using the PostScript 3 Printer Driver
Follow the procedure below to set up the PostScript 3 printer driver.
A
In the [Printers] or [Printers and Faxes] window, open the printer properties.
B
Click the [PostScript] tab.
❒ When using Windows 2000/XP or Windows NT 4.0, click the [Device Set-
tings] tab, and then proceed to step to clear the check box.