Ricoh 3224C Guía De Operación
Copying from the Bypass Tray
23
2
BBBB
Insert the paper with the side you
want to copy facing down until
you hear the beep, and align the
paper guide to the paper size.
want to copy facing down until
you hear the beep, and align the
paper guide to the paper size.
1: Extender
Important
❒ If the guides are not flush against
the copy paper, image skewing
or misfeeds might occur.
or misfeeds might occur.
Note
❒ Do not stack paper over the lim-
it mark, if you do image skew-
ing or misfeeds might occur.
ing or misfeeds might occur.
❒ When you load the OHP trans-
parencies, check the front and
back of the sheets, and place
them correctly, or a misfeed
might occur. Set the paper di-
rection to
back of the sheets, and place
them correctly, or a misfeed
might occur. Set the paper di-
rection to
K and select A4K,
8
1
/
2
"
× 11"K as paper size in
step
C
.
❒ Swing out the extender to sup-
port paper sizes larger than
A4
A4
L, 8
1
/
2
"
× 11"L.
❒ Fan paper to get air between the
sheets and avoid multi-sheet
feeds.
feeds.
❒ When copying onto envelopes:
⇒ p.26 “When copying onto en-
velopes”.
velopes”.
CCCC
Select the paper type and size.
Note
❒ When copying onto OHP trans-
parencies or thick paper, see
p.24 “When copying onto OHP
Transparencies or Thick Paper”.
p.24 “When copying onto OHP
Transparencies or Thick Paper”.
❒ When copying on the back side
of paper, see p.25 “When Copy-
ing on the Back Side of the Pa-
per”.
ing on the Back Side of the Pa-
per”.
When copying onto standard size
paper
paper
A Press the {{{{#}}}} key.
B Press [Select Size].
B Press [Select Size].
C Select the paper size.
D Press [OK] twice.
D Press [OK] twice.
When copying onto custom size
paper
paper
A Press the {{{{#}}}} key.
B Press [Custom Size].
B Press [Custom Size].
C Enter the vertical size of the pa-
per using the number keys,
and then press [#].
and then press [#].
ZGHS005e
ThemisC1_EN_Copy_F_FM.book Page 23 Monday, December 27, 2004 4:10 PM