Ricoh CL3000 Guía De Instalación
Options
16
1
Printer Hard Disk Type 3000
R CAUTION:
Important
❒ Before touching the Printer Hard
Disk, touch something metal to
discharge any static electricity.
Static electricity can damage the
Printer Hard Disk.
discharge any static electricity.
Static electricity can damage the
Printer Hard Disk.
❒ Do not subject the Printer Hard
Disk to physical shocks.
AAAA
Check the contents of the package
for the following:
for the following:
❖
❖
❖
❖ Printer Hard Disk Type 3000
❖
❖
❖
❖ Screw
BBBB
Turn off the power, and then un-
plug the power cable.
plug the power cable.
CCCC
Remove the two screws that fas-
ten the controller board on the
back of the printer.
ten the controller board on the
back of the printer.
The removed screws will be used
in step
in step
H
to fasten the controller
board.
DDDD
While holding the handle, pull
out the controller board slowly.
out the controller board slowly.
The Printer Hard Disk is to be in-
stalled to the position shown in the
illustration.
stalled to the position shown in the
illustration.
• Do not touch the inside of the
controller board compartment. It
may cause a machine malfunc-
tion or a burn.
may cause a machine malfunc-
tion or a burn.
ZHBPD010E
ZHBP080E
ZHBP020E
ZHBP160E
AresPGBOptionSetup-F_FM.book Page 16 Monday, July 29, 2002 1:12 PM