Tekkeon ET2000 Guía Del Usuario
7
USER GUIDE
6
To Remove the ezEarhook
1. Gently pull the ezEarhook away from the headset stem until it separates from the headset.
Powering ezTalker mini
To Turn On the Headset
1. Press and hold the TALK button until the blue LED flashes or until you hear the On tone
(approximately four seconds). The headset turns on and is placed in standby mode, ready to
make and receive calls. While the headset is on and in standby mode, the blue LED will flash at
two-second intervals.
make and receive calls. While the headset is on and in standby mode, the blue LED will flash at
two-second intervals.
To Turn Off the Headset
1. When the headset is on, press and hold the TALK button until the blue then amber LEDs flash or
until you hear the Off tone (approximately four seconds).
Making Calls
You can make calls from your mobile phone, or directly from ezTalker mini using the last number
redial feature or voice dialing commands (if these features are supported by your mobile phone.)
redial feature or voice dialing commands (if these features are supported by your mobile phone.)
To Make Calls From Your Mobile Phone
1. Dial the number from your mobile phone. The call is automatically connected to your headset.
To Make Calls Using Last Number Redial
(if supported by your mobile phone)
1. While the phone is in standby mode, press and hold the Volume
-
button until you hear a short
beep followed by a tone (approximately 3 seconds).
Fitting ezTalker mini On Your Ear
ezTalker mini is designed to fit comfortably in your ear. For added comfort, you can change the ezFit
Earpiece. For added stability, you can add the ezEarhook.
Earpiece. For added stability, you can add the ezEarhook.
To Place the Headset On Your Ear
1. Place the ezTalker mini speaker in your ear with the microphone angled toward your mouth. The
headset should fit snugly in your ear and remain in your ear when you move your head. However,
if the ezEarpiece is too large for your ear, you can replace it with the medium size provided,
and/or add the ezEarhook.
if the ezEarpiece is too large for your ear, you can replace it with the medium size provided,
and/or add the ezEarhook.
To Replace the ezFit Earpiece
1. To remove the ezFit Earpiece, hold the plastic and gently pull toward you.
2. Snap the other ezFit Earpiece into place.
To Add the ezEarhook
1. Position to hole on the end of the ezEarhook over the stem on the rear of ezTalker and push to
snap the ezEarhook into place.
2. If the ezEarhook is positioned for your right ear, swivel the hook counter-clockwise
until the hook is to the right of the earpiece and rotate the top portion of the hook
to wear on your left ear. If the ezEarhook is positioned for your left ear, swivel the
hook clockwise until the hook is to the left of the earpiece and rotate the top
portion of the hook to wear on your right ear.
to wear on your left ear. If the ezEarhook is positioned for your left ear, swivel the
hook clockwise until the hook is to the left of the earpiece and rotate the top
portion of the hook to wear on your right ear.
3. Mold the soft plastic on the ezEarhook as needed for a better fit.
NOTE: One side of the loop is easier to attach than the other side. If you have
difficulty inserting the loop, flip the loop.
difficulty inserting the loop, flip the loop.
Figure 3.
ezEarhook
(positioned for
left ear)
Figure 2.
ezTalker mini with
ezFit Earpiece