Breckwell P22FSA Manual De Propietario

 
Insert installations must be vented with 3” or 4” pipe. Pipe 
may be single wall stainless steel flexible pipe. Vent may 
terminate within chimney beyond a blanking plate or 
extend to the chimney top. See “COMBUSTION AIR 
SUPPLY” for outside air access information. 
 
The fireplace and chimney should be cleaned thoroughly 
before starting the installation. We suggest painting the 
interior of particularly old and dirty fireplaces to seal any 
odors. In zero-clearance fireplace installations, when the 
fireplace opening is above the floor or raised hearth, the 
adjustable “Breckwell P22 Z-C Legs” can be used to 
bridge the gap between the hearth and stove bottom. 
Refer to figure 14. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
A. 

 
Follow the instructions packaged with the P22 Flashing 
set part C-P22-MED (refer to Figure 15).