Frigidaire FPEC3085KS Manual De Usuario

Descargar
Página de 14
5
setting surFace controls
about the ceramic glass cooktop
The ceramic cooktop has radiant surface elements located 
below the surface of the glass. The design of the ceramic 
cooktop outlines the area of the surface element underneath. 
make sure the diameter of the pan matches the diameter 
of the element outline on the cooktop (See Figs. 1 & 2).
Heat is transferred up through the surface of the cooktop to 
the cookware. Only flat-bottom cookware should be used. 
The  type  and  size  of  cookware,  the  number  of  surface 
elements in use and their settings are all factors that will 
affect the amount of heat that will spread to areas beyond 
the surface elements. The areas surrounding the elements 
may become hot enough to cause burns.
Fig.1 - 30” Model - Cooktop Appearance
Fig. 2 - 36” Model - Cooktop Appearance
about the radiant surface elements
The element temperature rises gradually and evenly. As the 
temperature rises, the element will glow red. To maintain 
the selected setting, the element will cycle ON and OFF. 
The  heating  element  retains  enough  heat  to  provide  a 
uniform  and  consistent  heat  during  the  OFF  cycle.  For 
efficient  cooking,  turn  OFF  the  element  several  minutes 
before cooking is complete. This will allow residual heat to 
complete the cooking process.
locations  of  the  surface  radiant 
elements
Your  cooktop  is  equipped  with  radiant  surface  radiant 
elements with different wattage ratings. The ability to heat 
food quicker and in larger volumes increases as the element 
wattage increases.
The radiant surface elements are located on the 30” 
cooktop as follows:
•  One 9 inch radiant element located at the right front 
position.
•  One dual 5 or 7 inch radiant element located at the 
right rear position.
•  Two 7 inch radiant elements located at both the left 
front and rear positions.
•  One mid-position radiant element located between left 
front and rear elements. Connects with front element to 
form Bridge element.
30” cooktop
The radiant surface elements are located on the 36” 
cooktop as follows:
•  One small 6 inch radiant element located at the center 
rear position.
•  One dual 5 or 7 inch radiant element located at the 
right rear position.
•  One 9 inch radiant element located at the left front 
position.
•  Two 7 inch radiant elements located at both the left 
front and rear position.
•  One mid-position radiant element located between left 
front and rear elements. Connects with front element to 
form Bridge element.
36” cooktop
note
Please read detailed instructions for ceramic glass 
cooktop cleaning in the general care & cleaning 
section and Before You call checklist section of this 
Use and Care Guide.